Page 1 of 1
Z9/Z1000 frame brackets
Posted: Sat Jan 21, 2012 4:16 pm
Author: paul doran
has Anyone got a scrap frame for either a Z9 or Z1000
I need the brackets that the grab rail bolts to
it can also take the indicators if needed
Posted: Sat Jan 21, 2012 10:32 pm
Author: Z903
Was looking for these myself some time ago, have since found some but was offered a pair a couple of days ago. So if you get stuck I should be able to put you on to them....trouble is, they'll be in Australia
Posted: Sat Jan 21, 2012 10:45 pm
Author: z1000puddin
Paul,
The brackets are welded to the frame - yeah ?
I can make a set up so you can weld them on if that would do ??
Unless it is originality that you are looking for
stu
Posted: Mon Jan 23, 2012 2:10 pm
Author: paul doran
Stu mine ar cut in half I can make up something Myself if I dont get a set
We have an Engineering Business so it wont be a problem
Posted: Mon Jan 23, 2012 8:48 pm
Author: z1000puddin
No worries Paul,
BTW,
What is your capacity on the machining department, do you have a website ?
We are always on the lookout for good quality machine/engineering shops for a number of projects.
Stu
Posted: Mon Jan 23, 2012 8:52 pm
Author: paul doran
We have two Lathes and two milling machines and a fabrication shop
and a couple of large hydrulic presses
We also have access to a CNC Lathe and Mill
We also have a fabication shop
We do not have a website as believe it or not we dont advertise
We have never found the need to thankfully
Posted: Mon Jan 30, 2012 3:33 pm
Author: Ginger Bear
These any good to you Paul? they're from an LTD frame.
Posted: Mon Jan 30, 2012 3:40 pm
Author: paul doran
those would be ideal Steve
Posted: Mon Jan 30, 2012 3:42 pm
Author: Ginger Bear
Ok Paul, if you're not going to Donny, let me have an address to send 'em to. If you are going to Donny, I'll bring 'em with me.
Posted: Mon Jan 30, 2012 3:49 pm
Author: paul doran
Steve Donington looks less likely too busy
can You send them to
Paul Doran
DW Engineering
Unit 9 Ashcourt
Ashbourne Ind Estate
Ashbourne
Co. Meath
Ireland
cheers Steve
I will get You a few beers when we meet
Posted: Mon Jan 30, 2012 3:55 pm
Author: Ginger Bear
Sounds good to me Paul.
I'll go & get the grinder out.
