Z1OwnersClub GB

Does anybody have piece as per title 3x2x12" or metric equivalent piece surplus or can supply (it can be 2.5" thick)
Finish not important as will be machining it.

Just changed it from 4" to 3"

This will be to adapt Suzuki throttle bodies to Kwak Spacing
Thanks with regards
Grahame

How bizarre!

Just had an email from this lot, telling me all about their new website.

http://www.aluminiumwarehouse.co.uk/

Could be worth a try

Ginger Bear wrote:How bizarre!

Just had an email from this lot, telling me all about their new website.

http://www.aluminiumwarehouse.co.uk/

Could be worth a try

Steve, that's a very handy website, I've sadly, just added it to my favourites.
Nigel

Thanks again for info GB.
Sent a query in seems to supply in lengths of 2mts a bit in excess of what i want,but i found also some on eBay so lots of queries out..
Regards
Grahame

I'm going down the non-ferrous scrappers on Saturday morning. I assume you are not bothered about grade so if they have something that will do, do you want me to pick it up for you? If so what's your cost limit?

Hi Rich

Thanks for the offer,yes by all means enquire,grade not fussy,if a little wider/longer/thicker not a problem either
About £20-25 would be nice,but let me know anyway.

Txt me on 07835585949,i can receive txt here and send,save you having to return if you do find a piece

Can pay by Paypal if you get a piece

Regards
Grahame

Ok, I'll give you a call if I find anything.

Don't call me Rich,txt is ok..i am in Venezuela so its likely to bring out the roaming bandits for both of us

No luck at the scrappers today.

Thanks for looking Rich
Its appreciated.
Waiting for some quotes to come in from eBay,so likely will find a piece on there.
Have fun later
Grahame

Rich wrote:No luck at the scrappers today.

I am not surprised Rich
even the scrappers have to draw the line somehere and You Arris aint worth a plum nickel