Z1OwnersClub GB

Posted: **Sun Oct 30, 2011 7:10 pm**

The list of bits I need for the shafter is growing :evil:

Head - Head off any eleven would be good. Possibly GPZ? Ideally I would like one that has fairly fat shims

Seat

Both side panels

Final drive casing cover. It's the bit that covers the first bevel box.

Front mudguard

Rear Mudguard

Carb mounting rubbers - prolly have to get these new

This list will doubtless grow :cry:

Posted: **Mon Oct 31, 2011 6:37 pm**

I have a set of J inlet rubbers which i'm sure are the same , i can let you know the numbers on them .

Posted: **Mon Oct 31, 2011 6:45 pm**

vduk wrote:The list of bits I need for the shafter is growing

Head - Head off any eleven would be good. Possibly GPZ? Ideally I would like one that has fairly fat shims

This list will doubtless grow

Be aware that the valve angle is different on the GPz Unitrack stuff and you'll need to alter the pistons.
Not sure if it is the same with the b1/b2 models

Posted: **Mon Oct 31, 2011 8:15 pm**

Ralph,

I've got a nice set of forks. :lan

Posted: **Mon Oct 31, 2011 8:22 pm**

Ginger Bear wrote:Ralph,

I've got a nice set of forks.

Wicked Boy!

Posted: **Tue Nov 01, 2011 5:45 am**

Speak to Jerry about the club's replica side panels.

Z1OwnersClub GB

Z1100

Z1100

Re: Z1100