Page 1 of 2

Z1100 A3 ST

Posted: Tue Sep 20, 2011 12:06 pm
Author: RALPHARAMA
I will doubtless need loadsa stuff for this bike ... but so far the list is:

LHS Sidepanel

Good set of fork stanchions

LHS final drive engine casing unless I can weld up the original

Seat - of course :evil:

non-distorted brake calipers!

State of paint and stuff doesn't matter - I can repaint etc.

Posted: Tue Sep 20, 2011 10:07 pm
Author: RALPHARAMA
Best add front master cylinder :evil:

Posted: Wed Sep 21, 2011 11:03 am
Author: doebag
I am away from home for a few days, I will have a rummage at the weekend and see what I have.

Posted: Wed Sep 21, 2011 4:20 pm
Author: neilbarrett
il have a look as well,

Posted: Wed Sep 21, 2011 7:34 pm
Author: RALPHARAMA
Thanx Ladz

:D

Posted: Wed Sep 28, 2011 2:18 pm
Author: RALPHARAMA
Any Joy :?:

Posted: Wed Sep 28, 2011 2:53 pm
Author: doebag
Sorry, bit slow !

I have a left side panel, has the bottom lug missing and a small [1/2 inch] crack where the lug should be.

I thought I had a master cylinder and calipers, but they are different to those on my A3 model. Did the earlier models have different looking brakes ? The calipers look to fit, but are smooth and not finished black.

Posted: Wed Sep 28, 2011 6:47 pm
Author: nanno
I have a NOS tach in the original box. Only unwrapped once, when I used it to get some readings for repairing mine (which to my big surprise was a success)

Interested ?

Posted: Wed Sep 28, 2011 7:05 pm
Author: Padders
I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.

Posted: Wed Oct 05, 2011 7:14 am
Author: RALPHARAMA
nanno wrote:I have a NOS tach in the original box. Only unwrapped once, when I used it to get some readings for repairing mine (which to my big surprise was a success)

Interested ?


Nice thought, but the tacho is one of the few items on the bike that isn't actually broken and given that I am properly skint I will sadly decline the kind offer :cry:

Posted: Wed Oct 05, 2011 7:16 am
Author: RALPHARAMA
doebag wrote:Sorry, bit slow !

I have a left side panel, has the bottom lug missing and a small [1/2 inch] crack where the lug should be.

I thought I had a master cylinder and calipers, but they are different to those on my A3 model. Did the earlier models have different looking brakes ? The calipers look to fit, but are smooth and not finished black.


I have the same problem with the current side panel. I may have to try and get clever with epoxy :)

You have e-mail concerning calipers.

Thanx

Posted: Wed Oct 05, 2011 7:17 am
Author: RALPHARAMA
Padders wrote:I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.


Thanx Padders, I'll have to research that one :D

Posted: Wed Oct 05, 2011 9:44 am
Author: doebag
Ralph
I have added pictures of the calipers and m/c
The calipers fit on to my Z1100 and take the same pads, but look different.
The m/c may not even be a Kawasaki, the lid is a different shape, the mirror mount is in a different position and the hydraulic outlet faces front rather than towards centre line of bike.

CALIPERS

Image

M/C

Image

Posted: Wed Oct 05, 2011 9:51 am
Author: doebag
Padders wrote:I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.

B1 and A1,2,3 m/c have different parts numbers in the book, but this could be due to the colour. All the internal parts have the same part numbers.

Posted: Wed Oct 05, 2011 12:01 pm
Author: z1bman
the photo's from doebag are Suzuki gsx 750 parts

http://www.ebay.co.uk/itm/GSX-750-E-Fro ... 500wt_1054