Z1100 A3 ST

RALPHARAMA · #1 PostAuthor: **RALPHARAMA** » Tue Sep 20, 2011 12:06 pm

I will doubtless need loadsa stuff for this bike ... but so far the list is:

LHS Sidepanel

Good set of fork stanchions

LHS final drive engine casing unless I can weld up the original

Seat - of course :evil:

non-distorted brake calipers!

State of paint and stuff doesn't matter - I can repaint etc.

RALPHARAMA · #2 PostAuthor: **RALPHARAMA** » Tue Sep 20, 2011 10:07 pm

Best add front master cylinder :evil:

doebag · #3 PostAuthor: **doebag** » Wed Sep 21, 2011 11:03 am

I am away from home for a few days, I will have a rummage at the weekend and see what I have.

neilbarrett · #4 PostAuthor: **neilbarrett** » Wed Sep 21, 2011 4:20 pm

il have a look as well,

RALPHARAMA · #5 PostAuthor: **RALPHARAMA** » Wed Sep 21, 2011 7:34 pm

Thanx Ladz

RALPHARAMA · #6 PostAuthor: **RALPHARAMA** » Wed Sep 28, 2011 2:18 pm

Any Joy

doebag · #7 PostAuthor: **doebag** » Wed Sep 28, 2011 2:53 pm

Sorry, bit slow !

I have a left side panel, has the bottom lug missing and a small [1/2 inch] crack where the lug should be.

I thought I had a master cylinder and calipers, but they are different to those on my A3 model. Did the earlier models have different looking brakes ? The calipers look to fit, but are smooth and not finished black.

nanno · #8 PostAuthor: **nanno** » Wed Sep 28, 2011 6:47 pm

I have a NOS tach in the original box. Only unwrapped once, when I used it to get some readings for repairing mine (which to my big surprise was a success)

Interested ?

Padders · #9 PostAuthor: **Padders** » Wed Sep 28, 2011 7:05 pm

I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.

RALPHARAMA · #10 PostAuthor: **RALPHARAMA** » Wed Oct 05, 2011 7:14 am

nanno wrote:I have a NOS tach in the original box. Only unwrapped once, when I used it to get some readings for repairing mine (which to my big surprise was a success)

Interested ?

Nice thought, but the tacho is one of the few items on the bike that isn't actually broken and given that I am properly skint I will sadly decline the kind offer :cry:

RALPHARAMA · #11 PostAuthor: **RALPHARAMA** » Wed Oct 05, 2011 7:16 am

doebag wrote:Sorry, bit slow !

I have a left side panel, has the bottom lug missing and a small [1/2 inch] crack where the lug should be.

I thought I had a master cylinder and calipers, but they are different to those on my A3 model. Did the earlier models have different looking brakes ? The calipers look to fit, but are smooth and not finished black.

I have the same problem with the current side panel. I may have to try and get clever with epoxy

You have e-mail concerning calipers.

Thanx

RALPHARAMA · #12 PostAuthor: **RALPHARAMA** » Wed Oct 05, 2011 7:17 am

Padders wrote:I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.

Thanx Padders, I'll have to research that one

doebag · #13 PostAuthor: **doebag** » Wed Oct 05, 2011 9:44 am

Ralph
I have added pictures of the calipers and m/c
The calipers fit on to my Z1100 and take the same pads, but look different.
The m/c may not even be a Kawasaki, the lid is a different shape, the mirror mount is in a different position and the hydraulic outlet faces front rather than towards centre line of bike.

CALIPERS

M/C

doebag · #14 PostAuthor: **doebag** » Wed Oct 05, 2011 9:51 am

Padders wrote:I have a front mastercylinder off a GPZ1100B1 if its the same Ralph.

B1 and A1,2,3 m/c have different parts numbers in the book, but this could be due to the colour. All the internal parts have the same part numbers.

z1bman · #15 PostAuthor: **z1bman** » Wed Oct 05, 2011 12:01 pm

the photo's from doebag are Suzuki gsx 750 parts

http://www.ebay.co.uk/itm/GSX-750-E-Fro ... 500wt_1054

Z1100 A3 ST

Z1100 A3 ST

Who is online