Page 1 of 2
WANTED Z1000J GPZ1100B1 CENTRE STAND
Posted: Sat Aug 13, 2011 6:00 pm
Author: Padders
I am looking to buy a centre stand for a GPZ1100B1 I assume a Z1000J one will fit but would love to have this confirmed if anyone knows.
Posted: Sat Aug 13, 2011 6:09 pm
Author: z1bman
yes they are the same part numbers
Posted: Sat Aug 13, 2011 6:27 pm
Author: Padders
Cheers for that any idea if the Z1000k is the same
Posted: Sat Aug 13, 2011 7:12 pm
Author: z1bman
z1000 k/ ltd is different
Posted: Sun Aug 14, 2011 2:49 pm
Author: firyembers
if you can confirm the gpz 1100 unitrack is the same then i will send you for the cost of postage.
Its a littly tatty and do not use it,since i the lugs are missing off my frame..

Posted: Sun Aug 14, 2011 3:15 pm
Author: Padders
Unitrak is differant but thanks for the offer.
Posted: Sun Aug 14, 2011 3:34 pm
Author: firyembers
This the part number for unitrack 34011-1078 and fits zx1100 a1-a3
one here is that your model...
http://www.ebay.co.uk/itm/1981-Kawasaki ... 53e43dcdf1
Actually there is a few about so you should not have any bother getting one..
Its likely they are pretty standard and differ only by the part number.
If you like or do not find one measure up the shoulder bolt diameter,the connecting legs centre to centre and will let you know when i get back home in September (17th)
Posted: Sun Aug 14, 2011 3:55 pm
Author: Padders
No that centre stand is not correct for the B1 will try and find a picture of one and a part number.
Posted: Sun Aug 14, 2011 4:17 pm
Author: Padders
Not sure why this is now in bike help but below is a picture of the type of stand I need part number is 34011-1032

Posted: Sun Aug 14, 2011 4:21 pm
Author: Ginger Bear
I was wondering that Padders........ I'll put it back in the 'Wanted' section.
Posted: Sun Aug 14, 2011 4:23 pm
Author: Padders
Thanks steve
Posted: Sun Aug 14, 2011 4:31 pm
Author: firyembers
According to my Zedder program its on 10 models
If that helps

Posted: Sun Aug 14, 2011 4:31 pm
Author: Ginger Bear
Padders, just got this from Kawasaki.com
As z1bman says,
The stand you need is common only to these models;
KZ1000-J1 (1981)
KZ1000-J2 (1982)
KZ1000-J3 (1983)
KZ1100-B1 (GPz) (1981)
KZ1100-B2 (GPz) (1982)
Posted: Sun Aug 14, 2011 4:31 pm
Author: firyembers
According to my Zedder program its on 10 models
If that helps

Posted: Sun Aug 14, 2011 4:32 pm
Author: Padders
Thanks for the information guys just need to find one now !!
