Page 1 of 1
Csr / LTD MASTER CYLINDER
Posted: Thu Sep 10, 2009 7:29 am
Author: kev edwards
Does anyone out there have a master cylinder for a csr or ltd with the brake light switch hole in it . will pay for it .
something that may work
Posted: Thu Sep 10, 2009 10:53 am
Author: trikerdrew
I have a kwak brake splitter with a built in brake light switch.
Any use?
£10 delivered 1st class
drew
Posted: Thu Sep 10, 2009 11:16 am
Author: kev edwards
Cheers Drew , it's for my brother and he's a rivet counter so it's got to be the right one , thanks any way.
regards Kev.
Posted: Thu Sep 10, 2009 4:35 pm
Author: Steve Cooke
I have one that has a rectangular hole underneath with a small screw hole either side of it for some sort of switch, does that sound right? as I don't know what model it's off, if it does I'll take a picture of it and post it on here so you can check.
Posted: Thu Sep 10, 2009 7:13 pm
Author: kev edwards
thanks for the offer steve , but it's the type that has an angle on it also , for the custom type bars, cheers Kev
Posted: Thu Sep 10, 2009 7:52 pm
Author: Steve Cooke
No problem Kev, does anyone know what this type is off?
Posted: Thu Sep 10, 2009 8:55 pm
Author: Geoff Meager
I've got one ......
But you'll have to buy the whole bike
Posted: Fri Sep 11, 2009 7:53 am
Author: kev edwards
Bargain Geoff , another trip to the tip with the rest of the bike for me then.
Posted: Fri Sep 11, 2009 8:10 am
Author: mick znone
don't be silly Kev, we've all seen Geoff's bike, its to good for the tip, you'd get £50 at the scrap yard
Posted: Fri Sep 11, 2009 11:17 am
Author: kev edwards
Sod the £50.00 Mick , i'm not much of a capitalist