Page 1 of 1
Two Four Seat
Posted: Sun Aug 16, 2009 12:30 pm
Author: coldsummer
I'm looking for a proper 2-4 seat with the '900 double overhead....' graphics on and seamed vinyl cover. Must be earlier plunger type mechanism. I bought one a few weeks ago but is has later catch and older style rear hump...
Thank you very much!
Posted: Sun Aug 16, 2009 2:54 pm
Author: coldsummer
...............then I could let Hillbilly have my cut down one.......
Posted: Sun Aug 16, 2009 5:09 pm
Author: mick znone
think you may have to wait a while coldsummer, i looked for 12 months for one of these, they all seem to be the later type, hope you find one though, they are a nice seat.
Posted: Sun Aug 16, 2009 5:18 pm
Author: coldsummer
mick z1a wrote:think you may have to wait a while coldsummer, i looked for 12 months for one of these, they all seem to be the later type, hope you find one though, they are a nice seat.
The trouble is Mick, I'm very impatient, I might have to get one made up. Just hoped someone might have one for sale.
Posted: Sun Aug 16, 2009 7:14 pm
Author: Ginger Bear
Simon,
Do you know how uncomfortable these are
Posted: Sun Aug 16, 2009 7:20 pm
Author: brian 450
They are the best looking seat for a Z though.
Posted: Sun Aug 16, 2009 7:52 pm
Author: coldsummer
Ginger Bear wrote:Simon,
Do you know how uncomfortable these are
No GB, but they look really good and as I'm very shallow that is good enough for me
Posted: Sun Aug 16, 2009 7:53 pm
Author: coldsummer
brian 450 wrote:They are the best looking seat for a Z though.
My thoughts exactly!
Posted: Sun Aug 16, 2009 9:47 pm
Author: mick znone
i had one on my zed in the eighties, comfy enough, but my bum was bigger then. have you thought about taking one of the later ones apart and putting the plunger in
thats what i was going to do.
Posted: Sun Aug 16, 2009 10:19 pm
Author: coldsummer
mick z1a wrote:i had one on my zed in the eighties, comfy enough, but my bum was bigger then. have you thought about taking one of the later ones apart and putting the plunger in
thats what i was going to do.
Thought about that but it would need to be precisely located in order to fit properly. Also rubber placements look slightly different.
Posted: Mon Aug 17, 2009 12:00 am
Author: BShaw
just put a link in on ebay section for seat catch, in case it helps.
Posted: Mon Aug 17, 2009 6:33 am
Author: mick znone
coldsummer wrote:mick z1a wrote:i had one on my zed in the eighties, comfy enough, but my bum was bigger then. have you thought about taking one of the later ones apart and putting the plunger in
thats what i was going to do.
Thought about that but it would need to be precisely located in order to fit properly. Also rubber placements look slightly different.
what i was going to do was put the seat on the bike, put the plunger in the receiver with maybe some chalk on the top, close the seat, then you would have the exact spot marked out.
seat
Posted: Mon Aug 17, 2009 4:45 pm
Author: hillbilly