Page 1 of 1
(Frame) GOT ONE NOW Thanks everybody.
Posted: Mon Aug 10, 2009 12:43 pm
Author: Gus
Frame wanted please.
Either a 1000J, 1000R, 1100R or an early GPZ1100(not unitrak)
Please can you provide:
Condition
Price
Location
Muchos appreciatos amigo's.
Posted: Mon Aug 10, 2009 1:02 pm
Author: Taffus
Posted: Mon Aug 10, 2009 2:08 pm
Author: Gus
Hi Taffus, thanks for that.
Yeah, I've got my eye on that, but to be honest most of it will be surplus to requirements but anything considered at the right price.
So I suppose any J, R, GPZ project may be viable, with a V5 or not.
Tell me what you've got people!!!
hi there
Posted: Wed Aug 12, 2009 6:27 pm
Author: trikerdrew
got a z750L2 rolling chassis.
Before you dismiss it, the z1000 motor drops straight in.
Here is a couple of pictures. Bodywork now sold as is the engine provisionally.
Got a v5 for it and is sorn at moment.
£150
drew
Posted: Wed Aug 12, 2009 6:38 pm
Author: Gus
Hi Drew.
Thanks for the offer.
The frame I need is for a friend of mine who is going to build a race bike.
I have just called him.
He says thanks for the offer but he wants to keep the geometry the same as all his previous builds and he can utilise parts he has already got.
Thanks again
Gus
ok Gus
Posted: Thu Aug 13, 2009 8:02 am
Author: trikerdrew
Hope he finds something he can utilise
regards
drew
Posted: Fri Aug 14, 2009 8:05 am
Author: Robw
Hi, try John Browse, I got a R frame off him last year, I also know he had a few 1000J frames which are cheaper.
Regards Rob
Posted: Fri Aug 14, 2009 9:06 pm
Author: chrispeckitt
I have a Z1100 A2 rollin frame if any good?
Posted: Fri Aug 14, 2009 9:21 pm
Author: Gus
Robw wrote:Hi, try John Browse, I got a R frame off him last year, I also know he had a few 1000J frames which are cheaper.
Regards Rob
Hi Rob
I phoned John and he has some, but unfortunately my mate has gone on hol's and I'm off tomorrow. so I will follow it up.
Hi Chris
I'm not up to speed on 1100A frames but I'm guessing it is the same scenario as the MKII and the ST being different because of the shaft drive.
Thanks for the input.
Appreciated dudes
Gus
Posted: Mon Aug 31, 2009 10:32 pm
Author: Dark Skies
I've got a spare Z1000 K1 frame kicking about with the V5
It uses the J engine and the rear J wheel drops straight into the swingarm so I'm guessing the geometry is roughly the same. Different rake / trail at the front most likely though.
Frame is straight but tatty. Could have it for £50 if someone wants to collect it. Has the swingarm too.
Posted: Tue Sep 01, 2009 11:31 am
Author: Gus
Thanks for the offer Dark Skies but he has managed to get a GPZ1100B2 rolling chassis