5/8" Offset sprocket

[zed1015]

Wanted - 5/8" (15mm) offset, 17t , 630 pitch front sprocket with bearing nose for zed 9/1000. Or 19t ,530 pitch with bearing nose. Don't mind s/h in good nick.

[Keefleaf]

I think a Gpz 750 turbo drive sprocket might do it,worth a check.

[greenlaningxt]

You can get a billet one of Debben.

I have a 630 16 tooth one on the Harris, he did not think I would get away with the 17 tooth.

I have Hydralic clutch but still think I might try a 17.

What you fitting it to, whats the tyre and rear sproket size?

The GPZ one is offset but only 15 tooth, I have one somewhere, not been able to find any bigger standard type.

Let me know if you do find one!

[zed1015]

Already spoke to debben's (which is where i normally get them) and they say 630 offsets are now unavailable. 530's over 17t with bearing nose are special order at £100 +. I have a 17t, 630 pitch with 5/8" offset on the wakisaki with hydraulic clutch with no clearance issues. May have to go 18t without the bearing nose as a last resort and not use my outrigger bearing.