Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Spacer, 42036-024

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

Spacer, 42036-024

#1 PostAuthor: Paul Whitehouse » Thu Jun 04, 2015 8:24 am

Chaps,

I'm in need of the internal rear hub spacer (sprocket side), 42036-024, suitable for a 77 Z1000 A1.

If someone has a spare one that they're willing to part with, then that would be brilliant. Failing that, if someone has one that they could measure up for me so that I can machine a new one.

Cheers.

[img][img]http://i1126.photobucket.com/albums/l610/YT1961/77%20Z1000-A1%20REAR%20HUB_zpsjypn9fzw.jpg[/img][/img]
If it's too loud....too bad.
Phil Churchett Award Winner 2014
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 2337
Joined: 31st Jan 2008
Location: lancashire

#2 PostAuthor: hillbilly » Thu Jun 04, 2015 10:41 am

I have a mk 11 one.
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

#3 PostAuthor: Paul Whitehouse » Thu Jun 04, 2015 11:37 am

Cheers Hillbilly...does the Mk II use the same spacer then: 42036-024
If it's too loud....too bad.

Phil Churchett Award Winner 2014
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#4 PostAuthor: garyd » Thu Jun 04, 2015 5:29 pm

Be careful, pretty sure there are some differences heree.

I went racing with my Zed with spokes and took a spare set of z100 alloys.

When the rear tyre gave up, I thought I'd just swap the wheels but the specers were different. So that scuppered that weekend.
Top
User avatar
chrisu
Moderator
Posts: 4367
Joined: 3rd Sep 2005
Location: herts

#5 PostAuthor: chrisu » Thu Jun 04, 2015 7:29 pm

paul

i've got a few spare spacers - do you know the dimensions ?

they do vary as has been said
Top
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

#6 PostAuthor: Paul Whitehouse » Fri Jun 05, 2015 7:52 am

Hi Chrisu...cheers mate. no, don't know the dimensions, only know it as a part number, unless someone on the site has one that they could take some dimensions from.
If it's too loud....too bad.

Phil Churchett Award Winner 2014
Top
User avatar
walshyco
100Club
100Club
Posts: 175
Joined: 4th Oct 2009
Location: Exmouth

#7 PostAuthor: walshyco » Sun Jun 07, 2015 1:15 pm

Hi Paul, I have one from a Z1000 A1 wire wheels. I really want to keep it but you are welcome to borrow it to make one up. If you still need one pm me your address and I will send it to you, to make a copy. Sean.
Top
User avatar
Paul Whitehouse
100Club
100Club
Posts: 255
Joined: 20th Sep 2005
Location: Crawley, West Sussex

#8 PostAuthor: Paul Whitehouse » Mon Jun 08, 2015 8:35 am

Hi Sean, many thanks mate...much appreciated. I've PM'd you my address.
If it's too loud....too bad.

Phil Churchett Award Winner 2014
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 7 guests