Page 1 of 6
					
				armstrong mt500 bobber/tracker project
				Posted: Mon May 18, 2015 8:46 am
				Author: mick znone
				ive been toying with the idea of doing this for a while but thought the engine was to dull to work around, well i dont know if its because its grown on me or what but ive decided to go with it. here is the bike as it stands

 
			 
			
					
				
				Posted: Mon May 18, 2015 8:49 am
				Author: mick znone
				first question, i need to by a headlamp and ears, ive experienced the lottery buys on ebay and a while back bought a pattern part rear light for the above bike, it was so poor in quality i threw it in the bin rather than ruin some other poor unsuspecting bikers day. is there a good source of cafe/bobber/trackers spares.
			 
			
					
				
				Posted: Mon May 18, 2015 8:53 am
				Author: mick znone
				im toying with tank choice, ive seen one with a hodna 250g5 tank fitted and it looked good. the tank choice is limited because the mt is an oil in frame bike and needs a wide frame gap underneath.
			 
			
					
				
				Posted: Mon May 18, 2015 9:32 am
				Author: mick znone
				normal site rules apply, piss taking, ripping bike apart, joke links accepted, we can laugh, fall out, throw toys, leave the site, come back again etc, but this is a serious thread so will be staying around, if its spaced out with the usual b;ll;cks it will just make it longer but ever so slightly more fun  
 
 
 PS, im even toying with a z1 paint job  

 
			 
			
					
				Admin
				Posted: Mon May 18, 2015 12:00 pm
				Author: Jay1969
				to Admin, Mick's reply to this has been removed.
~Jay.
			 
			
					
				
				Posted: Mon May 18, 2015 1:29 pm
				Author: ADRIAN H
				you could talk to these guys, they have made some nice looking bikes. 
Good luck which way you go, or whatever you do.
Keep us updated, will be an interesting thread. 
 
 
 
http://www.redmaxspeedshop.com/flattrack.html 
			 
			
					
				
				Posted: Mon May 18, 2015 4:20 pm
				Author: nw66
				
  Thought I would start the proceedings off Mick  

 
			 
			
					
				
				Posted: Mon May 18, 2015 4:56 pm
				Author: Pigford
				I got some h/light brackets that may do.... whats you fork girth/diameter  

 
			 
			
					
				
				Posted: Mon May 18, 2015 5:03 pm
				Author: mick znone
				40mm Piggy.
thanks Jay, i think the tracker thing is mainly what i have in mind but im not totally sure at this point how to differentiate. but definitely agree , the tracker looks more the thing.
thanks Adrian, i will give the web site a look over this evening.
			 
			
					
				
				Posted: Mon May 18, 2015 5:58 pm
				Author: nw66
				
			 
			
					
				
				Posted: Mon May 18, 2015 6:10 pm
				Author: Pigford
				These any good Mick - 9.5/10 condition... yours if you want them  
 
Tape measure NOT included  

 
			 
			
					
				
				Posted: Mon May 18, 2015 6:29 pm
				Author: nw66
				
			 
			
					
				
				Posted: Mon May 18, 2015 6:36 pm
				Author: Pigford
				
I think Mick wants to 
do it himself - not just get the cheque book out  

 
			 
			
					
				
				Posted: Mon May 18, 2015 6:43 pm
				Author: mick znone
				Pigford wrote:I think Mick wants to 
do it himself - not just get the cheque book out  

 
  
  i think moanalot was feeling ignored there, sorry nw66, am i keeping you awake 

 
			 
			
					
				
				Posted: Mon May 18, 2015 6:44 pm
				Author: mick znone
				they look spot on Piggy, whats the deal  
