Z1OwnersClub GB

After the Z1A "old school rebuild" thread I posted many thanks to all who posted replies and well over half of you had a great interest in my garage and all the "junk" I have.

So I will keep you updated on other "projects" I have on the go.

This is the stove ive made out of a old propane bottle, put it in over the weekend and now Sue my better half, has got no chance of getting me out of the garage.

Went in garage in morning 4 degrees, 30 minutes later 22 degrees !!!

What else are all the rest of you messing about with ??

Wow! that is brilliant - I want one

Might be a bit of a numpty question - how did you cut the bottle without blowing up? I'd assume that a small amount of gas would still be in the bottle and using a disc cutter or oxy would be too risky?

Obviously this installation complies with building regs

Bollocks to regs and health and safety, common sense wins with me.
You need to see the circular saw im building to cut the logs !!

becker wrote:Wow! that is brilliant - I want one

Might be a bit of a numpty question - how did you cut the bottle without blowing up? I'd assume that a small amount of gas would still be in the bottle and using a disc cutter or oxy would be too risky?

Becker its all on you tube, remove valve and flush out with garden hose,
its a doddle done lots of em for lads round here.

Absolutely brilliant. If I lived closer I would have one of those off you.

becker wrote:Wow! that is brilliant - I want one

Might be a bit of a numpty question - how did you cut the bottle without blowing up? I'd assume that a small amount of gas would still be in the bottle and using a disc cutter or oxy would be too risky?

not like this dick ...

http://www.youtube.com/watch?v=aq1yV7P51yU

one i made