Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Point to Ponder.

Talk about all your non-Zed or even Kawasaki bikes here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Aztec Warrior
100Club
100Club
Posts: 448
Joined: 19th Oct 2014

Point to Ponder.

#1 PostAuthor: Aztec Warrior » Sat Jun 20, 2015 6:43 am

Getting lost trying to solve this issue.
The B/W feed wire to the points is shorting to earth as soon as the gap closes.
I just cant solve this one, yet, three sessions so far. I've missed something somewhere.

R/W to + Coil OK
B/R to - Coil OK
12v at coil and plug cap.
Capacitor OK

Image
Top
User avatar
mick znone
Hardcore
Hardcore
Posts: 6880
Joined: 13th Jun 2008
Location: Cornwall

#2 PostAuthor: mick znone » Sat Jun 20, 2015 6:50 am

ooh, lecky stuff, unfortunitly ive got to work today Aztec, but rest assured i will put my thinking cap on and see if i can come up with any help for you by tonight :up







probably not though :oops: :oops: :oops: :D


some answers will be along from this old pot of wisdom soon enough.
I DONT CARE, IN OR OUT BUT IM ENJOYING THE DEBATE......................ARMSTRONG MT500. a pushbike, waves.....addict, no offence
Top
Aztec Warrior
100Club
100Club
Posts: 448
Joined: 19th Oct 2014

#3 PostAuthor: Aztec Warrior » Sat Jun 20, 2015 7:13 am

mick z1a wrote:ooh, lecky stuff, unfortunitly ive got to work today Aztec, but rest assured i will put my thinking cap on and see if i can come up with any help for you by tonight :up







probably not though :oops: :oops: :oops: :D


some answers will be along from this old pot of wisdom soon enough.


The bain of all amateur fettlers! Something is staring me right in the face, but can I see it.....Re-wiring/adapting this Bullet loom is proving a bloody nightmare... :wall
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#4 PostAuthor: PAULJAC47 » Sat Jun 20, 2015 8:41 am

When points close they are supposed to short to earth/frame, its when they open the field in the coil secondary collapses and discharges through the spark plug to earth..Paul J
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
Aztec Warrior
100Club
100Club
Posts: 448
Joined: 19th Oct 2014

#5 PostAuthor: Aztec Warrior » Sat Jun 20, 2015 12:54 pm

PAULJAC47 wrote:When points close they are supposed to short to earth/frame, its when they open the field in the coil secondary collapses and discharges through the spark plug to earth..Paul J


Indeed. And getting one's bonce around that, and the anomalies of earth, ground, feed and return circuits makes for much tea making these past few days.... :roll:
Add to this the vagaries' of the Indian wiring diagrams, which are all slightly different, depending on which part of the world your Bullet is destined for, all adds up to much head scratching.. :??
Anyhow, it's 11am and I've done the old 'dodge and by-passed the offending bits and wired direct from the coil negative to the points, and all is well it seems, with a tell tale 'click' at the gap, a jolt through my arm from the ht confirms a good spark and the ammeter deflecting nicely.
Appears that the errant wire I was putting to the points, even though it's in the right place and looks to be correct, but is not actually a B/Red, is not the ignition wire. So confusing, makes the ST look positively simple in comparison... :)
Getting there, but just like the cricket, rain stops play... :roll:
Cheers
Top
Post Reply

Return to “The Bottom Shed”

Who is online

Users browsing this forum: No registered users and 6 guests