Been working on the z900 most of the day Trying to sort the carbs out Checked / main jets / needles / float heights / fuel tap All seemed to be ok I had bought a Accent Electric ignition a couple of months ago So I fitted it It looks like the old points ignition was the problem She pulls fine now St...

To be honest I don't think he new I was there
And when he did open he's up he disappeared very quickly
But I would of had him if the bike had been running better ,that what I keep saying to myself

Hi all
Went out for a ride today
I was trying to keep up with a zx1200
Bike pulled fine upto about 5000 rpm
On half throttle on full throttle it slowed
I'm thinking it might be the main jets
Apart from that she did ok

What time will you be getting there

Just had the chain guard off and the clutch cover off I can't see anything wrong Chain looks like it's in line with the front sprocket Refitted all the parts back on turning the wheel over by hand It's not rubbing now i will take it out tomorrow to see if all is working Could be that I fitted the ch...

Just had a look at the fuse Looks like I put the wrong fuse in should have been the 20amp I put the 10amp in The eyes are not as good these day Building up to having lens replacement The chain is a 530 I think it was rubbing on one side of the chain guard so I tied it over Have to have a look under ...

Been out on the z900
Sounds like the chain is rubbing
And put the lights on I think it's a higher voltage
After about 5 mins the fuse poped do I put a lower voltage bulb in

He makes it look easy
I have order the tool and will give it a go soon
Thanks for the help
.
.
Pin

Where's the best place to get them from
Having a quick look the prices go from £16 to £70 per set

Hi all after some advice Just had the bike mot after a strip and rebuild not touched the engine I purchased the bike and striped it before I had done any miles on it, On start up I look like a blue arrow for about 30 seconds out of the top right hand exhaust then it clears I think the valve oil seal...

Think I might have done it
I did not have the rear light wired up
Once I did the clock light stopped coming on when I pressed the brake
But I think the bulb has blown in the cluster
Thanks for all the help

Hi all
I'm nearly there about 99.9%
Everything is working bar one
When I press the brakes the clock lights come on
I'm still working on the front brakes so I put a wire across and the clock lights come on

Lol
Yes I do agree with you lot
Saturday I'm going to go through the wiring make sure every thing
Is clean and fitting right
But hopefully if is working now it can't be much

I love my z900
Went out to fix the wiring and
It fixed it self it all working ok now
Am I fooling myself

Just a update

Oil pressure switch buggered / ordered a new one
Going to swop the neutral and high beem / easy one to do
Tried the old switches but the lights still don't work with either must be something I have done
End on a good note / it started up and sounds really good
.
.
Pin