i need a set of kz1000a2 badges to finish of my project , i am in the oxford area can anyone help please thanks gary.

well i brought these carbs a long time ago and purchased a dynoject kit , i have been building this bike on and of for more years than i can remember, but i did not realise that there would be a problem with the fuel tap until i fitted the tank , i might still use the original fuel injection , this ...

will have a look today and see if its smaller, thanks Gary.

hi i have a z1000 a1 and have updated the engine to a gpz1100 with cv carbs, but the original fuel tape is fouling the carbs bodies and filters when fuel tank is fitted , need to change tap for smaller tap for cv not slide, or any mods anyone can recommended, thanks gary

sorry boy's no progress as yet, waiting for some parts from kawasaki , will keep you posted ,thanks gazza.

hi paul no i haven't yet , my fuel petcock is straight throw no vacuum pip fitted this is blanked of, i will try tomorrow when its still light thanks

thanks for all your resp-once's i haven't tried new spark plug as yet and i not sure that the efi intake rubbers are ok to use on carbs , or should i change them?i have a gs1000 and although the top end cams on one side are worn after a few turns she always starts with no problems , don't think its ...

i have not looked at the valve's yet that will be my next call, plus another look at my carbs , thanks for your advice gary

hi , can anyone help?, have a gpz1100 unitrack motor i have fitted to my z1000a2 project , when the bike was fitted with efi , it was running ok, but i converted to carbs, and have a set of z1000j carbs from which i have cleaned and cleaned but the bike will not start from cold , but once started th...

I'ME LOOKING FOR A PAIR OF SHOCKS OF A GSX1400 OR XJR1300 , OR MAYBE OTHERS AS LONG AS THEY ARE PIGGY BACKS AND OF , THIS IS FOR A Z1000A BUILD OVER WINTER, THANKS GARY.

THANKS FOR THE INFO, AND YES THE GRINDER IS ALWAYS AN ,OTHER THAN THREADS ARE NOT DEEP ENOUGH TO SCREW IN THE STEM, TO MUCH TROUBLE WITHOUT A LATHE , THANKS GARY

HI THANKS FOR ALL YOUR RESPONCE , REALLY ONLY NEED THE STEM TO REPLACE ONE FROM A EARLY EXUP FRONT END AS THIS HAD COME OUT OF A UNITRACK AND IS FAR TO LONG, HOPING ALL STEMS FROM Z1R2/1100R/Z1000J ARE ALL THE SAME IN LENGH AND THICKNESS , THANKS GARY

well as soon as if possible , if you can give me some sort of time i would be great full , thanks Gary

in need of a bottom yoke from a gpz1100b1/b2/j/r , also would like a complete set of engine mounts for above as i have a frame which has had mounts removed originally for a gsxr1100 engine , so i could do with the original's spacers if possible i then can re install the proper engine , have a long w...

just what i was looking for , just got to sort my loom out( it's in a bit of a mess)then it all might come together, thanks