if you have a look on the 750turbo site i think in the new parts section there's a place in the usa selling engine temp sensors for $16

hello gents does anyone have a side stand switch for a gpz 1100 a1 in good working order that they want to sell.
thanks john

hello gents the fast idle on my gpz1100 isn't working properly. the choke part works fine but as soon as you put the lever down to fast idle it just goes onto normal tick over. everything seems to checkout ok on the bar mechanically is there something else i could check.
many thanks in advance john

hello gents does anyone know if clymer manuals give you step by step instructions on how to get the cylinder head off my gpz1100. it needs time serts or heli coils in some of the m6 holes.
many thanks in advance john

cheers mate thank you very much.

hello gents does anyone know if the cam cover bolts are the same size on the gpz1100 a model and the gpz1100 b model. i cant seem to find any cam cover bolts for the a model or the sizes anywhere.
many thanks in advance john

+ 1 for por15 used it a couple of times with no problems as said above time consuming.

there's an article on frame bracing in this months practical sportsbikes that may be some help to you.

i saw some black plastic dye on ebay a while ago that should do the trick. sorry don't know how to put links up.

john warrington motorcycles do frame straightening he's a good bloke but its a fair distance from you he's based in malton north yorkshire.

thank you for the reply mate.

thanks for that will try it.

Yes mate the side stand switch is still on the plunger is working ok. Does it want checking for continuity.

yes mate all cleaned new filters and new plugs.

no mate no flashing was thinking it could be the injectors because when i got the bike the tank was orange with rust on the inside and the filter was the same.it only judders on part throttle when its fully open it runs fine. thanks for the replies john