Z1OwnersClub GB

kwak

hi rob (supercharged zed)
the bit or part interested in is the Z zed butt rear end in aluminum like what you done but i want still use the conventual seat just a stronger tail piece and light holder

cheers

andy

kwak

hi all
i am thinking doing a top end oiling what is the best way is any info as not found any on here prob looking in wrong place sure there use to be remember seeing it few years ago braided lines and modding head etc any info be great and pros and cons as well

many thanks

kwak

hi all been told about a cb 900 / cb 1100 starter motor mod swap has any one got any info on this

many thanks

kwak

this is what i want i want a complete set clocks does not mater condition as i want take original insides out and put digital instruments in there and adapt if smaller so they fit then put back together and mount etc http://i1185.photobucket.com/albums/z352/Andy_Clegg/KOSOdl02r_zps622cd1e2.jpg http...

kwak

I've fitted one to the rear sprocket. Swapped the studs for bolts & drilled the heads; http://i630.photobucket.com/albums/uu28/StevenLewisSharp/Lawson%20Project/DSCN3601.jpg Glued in the magnets; http://i630.photobucket.com/albums/uu28/StevenLewisSharp/Lawson%20Project/DSCN3602.jpg All fitted; ...

kwak

pertonpc wrote:You can buy new black clock lower cases from Z1 Enterprises lads.
Black tops are not avail new as far as I know.

Chrome tops + bottoms avail new from Z Power, eBay etc.

From Mark

hi mark

that great just what needed thank you so much

all best andy

kwak

zpower wrote:Thats the same idea as me

So if there are two sets can I have one please

Cheers,
Phil.

by all means
if we find some then we could go halfs if you want

andy

kwak

hi all i have a z900 A4 does any one make pattern or know where i can get the speedo and rev counter cases and glass i do not need the insides as i am going to convert to digital so does not have be working as long as is solid if used the outside then i can repaint or powder coat and good bottom as...

kwak

is it possible to fit a pulse pick from the sprocket so i can run a digital speedo rather than the cable conversion or magnet on discs as want it to look neater so was thinking something like zx9 front sprocket nut as it has the tabs for sending pulse to pulse switch something along these lines if ...

kwak

hi all
i am after some Z900 / Z1000 clock casings the internals do not need to be working as i just want the outer casing and top glass as want use for my Z project

be great if some one can help

many thanks

kwak

Google Koso. (Digital speedos direct) or something like that. I'm sure that they sell a gizmo that will screw into your speedo drive & convert it to 'pulses'. that who speedo is off koso was seeing if there was another way that people had used different speedo pick up and adapted it rather than...

kwak

i am changing my speedo over to digital on my Z900 rather than run magnetic pick up on discs is there any mod or conversion so i can run a pick off the speedo so it keeps neater looking

thanks all

kwak

wanted a complete set of engine plates and spacers for my 1976 Z900 or if some cane do a set of billet ones

msg me or you can email me

andy.jc@sky.com

many thanks

kwak

hi all i know probably going be a big debate and down to individual i am thinking getting new Z which eventually i would like to put big block over 1200 or so what would best Z to do this be ie Z900 , Z1000 or Z1000r as not sure what bits are interchangeable and offer best performance parts etc man...

kwak

what is the the difference between a z100 mkII and a z1R ?

Search found 48 matches

hi rob

z 900 / 1000 top end oiling

starter motor swap

clocks

speedo and rev counter cases

speedo help

clock casings

speedo

electric speedo

wanted Z900 / Z1000 engine brackets

best Z

frame