Thanks Steve

Where's the venue? Plus is a late Friday arrival ok, my foul mouthed other half may not be able to escape work.

After meeting a few of you guys last weekend at the lower lode, I'm seriously tempted to get doown to this. Will count up my available hols at work.

saw the US ebay sales, thanks wayno, thats always my first stop. Was hoping to get some in the UK, it seems odd theyre not available, they must rot with age.
Re finishing would be an absolute last resort I'm afraid, the bike is getting LOTS of use this summer.

Anyone know of a source for these? They seem fairly common thru the old kwak range, kh kz etc Tho I need them for my z1r
I could do with a pair to replace the nasty, rusty, items in my calipers at the mo.

The fittings are tapped 1/4 NPT, I can get an adaptor to screw into that at whatever size is preferable. If AN -8 is the one to go for, I'll buy suitable hose and go with that.

cheers guys

Hi guys, I know this topic has been done to death, but I'm addicted to ebay and couldn't help myself... Oil cooler and fittings from the crankcase ( oil pressure sensor take off? and the other one next to it) bought. What size hose (internal diameter) should I buy? Most seem to come with a AN rating...

I have every intention of coming and setting up tent.
PLEASE disregard the state of my bike.
Had to move house and thats taken up time I shouldve spent fitting the shiny bits Ive bought
moving in this sat, so the clocks running...

that was me taffus, trying to get as many opinions as poss

Apologies if this is a repeat remark covered elsewhere. But checking the clearances with the camlobe pointing away from the shim gives smaller clearance results than doing the check with the lobe at 90 degrees to the shim. The clymer manual for my z1r isnt very clear, making remarks about sprocket m...

got a ride down to the sonisphere festival on thursday, so I was pretty desperate to get the Z1R road legal for tent carrying etc.
You can't get much gear on a gsxr 2 up...

thanks for the replies fellas, looks like the guys at DK have sorted one for me.
F. expensive tho £100, which I just BET doesn't include VAT...

a bit off topic, but for caliper rebuild kits etc, there's a great place called
kwakies in stoke 01782 510795
bit of a shameless plug for them cos they were great with me.
turns out my caliper was too far gone to be rebuilt according to the mechanic.

dont know if that'd fit, tried an online part number catalogue earlier to get matching bikes, but had no joy with the bugger.
anyone know what's a match with a kz1000d1?
thats my z1r

A bit of desperation here, put my z in for an mot after a long time stood and the rear caliper has "eaten itself"!
Anyone got a spare? will collect and pay a good price.
I'm in stoke

ps REALLY need this before thursday 7 july