Hi guys,a while back I got this in an email from a mate and I was wondering if any of you guys could identify it ,cheers.Ken..

Hi guys bit of an update with new seat ,530 chain conversion and Hagon shocks.cheers Ken.

thanks Steve,I guess I will have to get a standard one machined to fit my hub,I'm interested to know what others have done or recomend.Cheers Ken.

Hi Guys,I am looking at replacing the rear sprocket on my CR and was hoping one of you kind gentlemen could tell me the distance between bolt holes on a standard Z900 sprocket ,the sprocket I have at the moment has bolt holes at 65mm apart, I am unsure if the Rickman rear hub(wire wheels)will take a...

I've got 15-33 with a 630 on my CR,couldnt tell ya what revs and speed is as I havnt got around to wiring the tach up yet

Harold,have you tried Don Newell in QLD? he sells mettise frame kits and bits for bultacos and stuff,0733531874.cheers Ken.

Not sure if you can buy it in the UK but I,ve used this stuff called Devcon ,2 part epoxy repair putty,its slow curing(2hours) so you can have a bit of a play with it,good industrial suppliers should stock it.

I thought they might have been Betor considering the forks are,I tried a few shops here that specialise in Bultaco's and Montessa'a and stuff but struck out .Cheers Ken.

this is the ffitting I got from work

it does the job but I would really like a proper one.

Hi Lads ,I'm a bit pissed of at the moment,I've lost the top triple clamp dome nut from my CR,after dozens of calls trying to find one with no luck,even trying to find what thread type it is was interesting,one of the fitters at work measured it and came up with a hydraulic fitting that fits perfect...

finally got to go for a ride after fitting the APE clutch plates and the first ride the clutch was slipping like you wouldnt belive so I backed off the adjuster at the pushrod and all seems fine now though it still seems to be to heavy,but that could be down to having clipons and putting to much dra...

hey guys,how did you go about bleeding the system?did you do it with the cover off or with the cover on and just bleed the air out at the master cylinder?Cheers Ken.

I reckon I'll be lookin at this also.