Specifically Z1,Z1A or Z1B
Regards
Steve

Mike,
Looking at images on the Zpower link the ones I have are definitely not Z1000A1.
Regards
Steve

Mike,
Do the Z1000A1 handlebars have the hole in them to retain the right hand switch gear as I have a set that are exactly as Z1 but minus the locating hole.
Regards
Steve

Don,
The date code for the the Z1 master cylinder is shown as a single number internally i.e. 2 or 3 for 72/73 Z1.
The brake caliper bracket uses the same single number identification.
Regards
Steve

Tim,
A real shame it suffered some damage during shipping.
Regards
Steve

Don,
A warm welcome to you and thanks for posting the pics of your 72 Z1.
It's good to get a new member with a Z1 .
Regards
Steve

John's book I believe is still available and is a must, along with Zpower's parts book for the Z1 range,for anyone carrying out a serious restoration.
Regards
Steve

The shorter unit is correct for a Z1B- Frame No 55500 onwards according to John Brookes' excellent book.
Regards
Steve

I remember the parts being sent to Mikey for plating and during the plating process no zinc got past the seal.
Regards
Steve

1)Remove the label using steam from a kettle. 2)Desolder the 2 wires from the solenoid and using a desolder suction tool clear the solder from the 2 brass ferrules that the wires from the coil exit. 3)Remove the 2 main connection bolt nuts. 4)Remove the 2 screws that secure the insulator. 5)Pull the...

Post a picture of the 2 showing the inner side for easier identification.
Regards
Steve

Harri,
Yes I replated mine on my Michigan to West Sussex 73 Z1 resto(in projects)
The resto is featured but the bit on the solenoid plating got Wiped.
I will add to this thread over the weekend.
Regards
Steve

Johann,
Welcome,great bikes.
Good to see another Z1 appearing on here.
Piper special is superb.
Regards
Steve

Humbrol paint with fine brush,allow to dry off a little till tacky.
Wipe any excess with a lolly stick that has kitchen roll wrapped round it with lighter fuel on it.
Best way of repainting Black on points and alternator covers around DOHC too.
Regards
Steve

The correct strap is available as a pattern part too.
Regards
Steve