There good, where is the built in indicator? I'll try and get a picture but I'm the mean time try and imagine that the lights of the Halo are individual LEDs - every other one is orange and is the indicator part. When the indicator is active the white ones go out and the orange ones flash as indica...

so after watching some people around the roads with H4 type lights and nearly being cut up with a "dint see you" sort of hand signal.... Take these and be dazzled instead. City 5W vs DRL Halo before and after all on the same bike: http://i665.photobucket.com/albums/vv20/howiehowie93/FullSi...

Greetings, one of the Winter Projects is trying to update the Headlights on Horace from twin 60/55W lamps to two LED type - 'cos loads more light,less power consumption and very see-able Halo lamps added. I have the new light units but they are too big to just fit in the holders as direct replacemen...

I have the same trouble with Horace when I replaced the Points with a Piranha. Since my new Dyna-S uses the same Mechanical Advance thing there is still the same issue. I took a round file to the holes to make them longer then I just set up to have the advance correct and left the idle setting to be...

So where is a good place to buy CR31's in the UK ???


Looking for something for Horace Engine #2 which will be 1075 when its finished.

H wie

Envious doesn't cover it !

Horace is fitted with a universal Push / Pull kit from Venhill

I think K&Ns these days have little restriction and more the better if you were to fir the bigger size ones.

As said above - Filters are there for a reason and engine damage can be expensive to fix.

zed1015 wrote:1/4 NPT.

Yup thats the size

So on Thursday Horace passed the second MOT (after a shameful 358 Miles since last years MOT) and after a ride around the back roads of Lincolnshire for about 100 miles then parking up and not needing to do anything in the way of quick fixes or feel the need to change anything else - I reckons that'...

Pigford wrote:Neat - is that from Monster Craftsman... looks similar to mine

yes it is a Monster Craftsman one - most of it anyway.

I'll be buying some switches from Motogadget. Can I suggest you have a look around before buying the motogadget handlebar switches. They are very fiddly to wire up - 3mm cross point screws inside. The Wires have to go inside the handlebars, unless you cut away the sidewalls to accommodate them. Plu...

On a sixty mile ride I had 125DegC without a cooler and I think it hadn't stopped going up With the cooler installed over the exhaust headers and riding out on the roads and not going too mad the max it got to was 99DegC I did try and find out what a suitable temperature for a Z was but never did fi...

Hi
Was looking at siting mine away from the traditional place and that looks different. Did you notice any difference in temperature of the oil in the two positions ?