Thanks guys, I have the older style lifter where the helical mechanism (with it's 11 BBs) bolts into the J/GPz casing. Thus I want to try and fit the Easy Clutch lifter and am just trying to ensure it will fit in this application.
Matt

Hi, can anyone give me a definite confirmation that the Easy Clutch kit from the likes of Webike can be used on the Z1000J1 or GPz1100B1, where the early models used the same ball bearing cage and helical track clutch actuator as the earlier Z's...Z1000A etc? http://japan.webike.net/products/1522726...

Hi Jack, think I have a tap or two knocking around...would need a good clean up. I will have a look tomorrow and email you some pics if you like.
Matt

Anyone have any surplus indicators for J or GPz? The patten ones on sale are all about 15mm too long and look even more daft than the originals. I can clean / re-spray but don't want cracked or with corroded electrics. Will replace bullet connectors and lenses. Need screws, washers and seals intact....

I'll send you a pm ok.

Not tried to fix the relay. I actually have not used the B1 EFI system as switched over to carbs...however I have most of the parts knocking around so if you want anything pm me and will see if I can help you out.
Matt

Hi, I have rebuillt a few of the B1/J ignition switches. If the key will rotate to all it's correct positions then the problem is in the contact plate on the bottom. All the switch does is to rotate a flat blade that rotates the contact plate. Undo the small screws that retain the black plastic cove...

Thanks....and yes you are right pn the H**** 0.8kW. Can you let me know what you want for it?

Ta Matt

Anyone have a good working starter motor to fit a Unitrack GPz or B1/2 or J series Z1000s they would be willing to part with for reasonable dosh? There are a couple on flea bay but would prefer to get a good working one if possible. There is also a H**** CB900 one up there (0.7kW) but feeling too la...

Thanks Al, f you do have one I will pop up and grab it.....cheers Matt

Anybody have a cam chain tensioner body to fit a 1000J or GPz 1100. I don't need any of the innards or the cap just the body.
I managed to shear off the threaded portion of mine doing it up by hand with a ring spanner....had not eeven reached for the torque wrench either......doh...

Ta Matt

If you did not get sorted I have the ignition system off a GPzB1 that includes the ignitor. No idea if it works but you are welcome to try it.
Matt

Cheers...will check em out...

Takes a small 5W bulb with bayonet fitting. The lens has a rubber ring that the metal bulb holder pushes into. Thanks

Anybody have a decent condition parking light bulb holder they are happy to part with? I assume that most models use the same part but if they are different I need one that fits a Z1000J or GPz1100B1.
Cheers