Can anyone identify this wheel for me from the code stamped on the rim? Its marked up with Takasago 185 x 19 4L 303 Japan. it has a black hub with 6 bolt holes for the disc. It came in a box with a project bike just purchased

Z1R has the tickover adjuster on the bottom

Sorry PADDERS sold a pair 3 month ago for 20 quid, am sure you will find some soon. look in Ebay shops under Z1, there is some on now.

Nice new bike Ian, Are you going to post some pics for us? (KZ 900 LTD on a P Plate) Pleased you won one on Ebay at last. Great project, Well done and good luck.
Mick.

Thanks Al But i think i have a rotor now, the bits i still need are the engine case and the windings.

Many thanks for your reply, Mick

Thanks Paul, now i can start to look for the parts i need to complete the motor.

Hi all,Can any one help me identify the engine i have here, it came to me with no casings and no altinator. I have fitted standard casings from a Z1000 A1 inc the rocker cover with no problem, the problems started when trying to find a rotor nothing from the early engines fits. When it came to me it...

Hi, I am looking for a Z1000 A1/A2 or a Z900A4 Tank, not to bothered what the paint is like as it will be re-sprayed but must be solid. Anyone got one for sale?

Regards Mick

Hi All, Can anyone tell me if they Know the diffrence between the frames on a Z1000 A1 and the A2? i have just looked at the Z power parts book and they have diffrent numbers!!!. This came up when rebuilding that pile of scrap i bought last month from Ebay, it has a very low frame number and caliper...

Fraid so, yours will have a grove for the woodfuf key and a less shallow tapper than the one i need, Thanks Anyway.

Regards Mick

Anybody got a rotor and securing bolt for a Z1000 A2 or Z1R for sale, Its the only parts i need to get my 1978 Z1000 A2 back on the road.

Regards Mick,

Hi Do you need a calliper with a hose or steel pipe
Regards Mick.

Hi Fluff, I had the same promlem a couple of years ago on a Z1000 A1, try'd every thing :- pump, oil presure switch, wireing, and after totaly flushing the system then rebuilt the motor the problem was still there!!!! so when i droped the sump again i looked at the O'ring that sits between the sump ...

Good For ducks but i just polished thr zed again ready to sell

Hi
I had the same problem with my carbs and after many strip and rebuilds i found out it was small rust deposits in my tank!!!! Once i treated the tank the problem went away.